IGBT Driver core 1700V, 30A, 2 Channel ,Base of Drivers IGBT > 400A
The SKYPER 42 R IGBT driver core constitutes an interface between IGBT modules and the controller. This core is a half-bridge driver with the basic functions built-in for driving, potential separation and protection. The SKYPER 42 R was developed for systems in the power range of 1 to 8 MVA. When using Semikron IGBT driver cores an adapter board (RS 905-6059) is required between the IGBT module and the gate driver core.
Two output channels, Up to 50µC (micro Coulomb) gate charge, Integrated potential-free power supply, Short Pulse Suppression (SPS), Under Voltage Protection (UVP), Drive interlock (dead time) top / bottom (DT), Dynamic Short Circuit
Basic information:
Marking manufacturer | SKYPER42R |
Type of component: | Core Driver IGBT |
Kategorie | Driver |
Configuration: | Low+High side |
Specification: | 2-channels |
Number of circuits (in case) | 2 ks |
Case type: | Modul |
Case [inch] : | SEMIDRIVER |
RoHS | Yes |
REACH | No |
NOVINKA | N |
RoHS1 | Ano |
Packaging and weight:
Unit: | pcs |
Weight: | 56.65 [g] |
Type of packaging: | BOX |
Small package (Number of units): | 1 |
Big package (BOX): | 50 |
Electro-physical parameters:
Udc-sup.min (Min.Supply DC Voltage) | 14.4 [V] |
Udc-sup.nom (Nom.Supply DC Voltage) | 15.00 [V] |
Udc-sup.max (Max.Supply DC Voltage) | 15.6 [V] |
Uisol (@25°C/1min/50Hz) | 4000 [V] |
UDC-OUT (off/min) | -8 [V] |
UDC-OUT (on/max) | 15 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 30 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | 30 [A] |
du/dt (critical rate of rise of on-state voltage) | 100000 [V/µs] |
Pmax without heatsink ( TA=25°C) | 4 [W] |
Input Logic Level (UGS level) | 15V |
f max | 100 [kHz] |
Qg (Total Gate Charge) | 50000 [nC] |
Thermal and mechanical parameters:
Tmin (minimum working temperature) | -40 [°C] |
Tmax (maximum working temperature) | 85 [°C] |