The SKYPER12R is an IGBT driver core for all IGBT modules 600V, 1200V & 1700V modules in the range of 80A to 400A like MiniSKiiP Dual, SEMIX5 or SEMIX press-fit, Fits to full SiC MiniSKiiP SKiiP. Can be plugged or soldered on a simple adapter board; Fast and safe in high reliability for full inverter portfolio; 100% tested and qualified for insulation, power supply, driving and protection; Cost effective.
The Board SEMIX5 MLI SKYPER 12 R is an adapter board which can be used for driving the MLI module
SEMIX5. The Board SiC MiniSKiiP with SKYPER 12 R is an adapter board which can be used for driving SiC MOSFETs
in the MiniSKiiP housing. The board can be directly plugged on the module.
Robust rectangle signal transmission, Two output channels, Adjustable dead time and filter time, Active clamping, MLI ready, Highest noise immunity , Secondary side error input for insulated over temperature trip, (UVP) and (DSCP), Fast mode detection for short circuits
Basic information:
Marking manufacturer | SKYPER12R |
Type of component: | Core Driver IGBT |
Kategorie | Driver |
Configuration: | Low+High side |
Specification: | 2-channels |
Number of circuits (in case) | 2 ks |
Case type: | Modul |
Case [inch] : | SEMIDRIVER |
RoHS | Yes |
REACH | No |
NOVINKA | N |
RoHS1 | Ano |
Packaging and weight:
Unit: | pcs |
Weight: | 35.82 [g] |
Type of packaging: | BOX |
Small package (Number of units): | 1 |
Electro-physical parameters:
Udc-sup.min (Min.Supply DC Voltage) | 15 [V] |
Uisol (@25°C/1min/50Hz) | 5000 [V] |
UDC-OUT (off/min) | -10 [V] |
UDC-OUT (on/max) | 15.7 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 20 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | 20 [A] |
du/dt (critical rate of rise of on-state voltage) | 50000 [V/µs] |
Input Logic Level (UGS level) | 15V |
f max | 100 [kHz] |
Qg (Total Gate Charge) | 2500 [nC] |
Thermal and mechanical parameters:
Tmin (minimum working temperature) | -40 [°C] |
Tmax (maximum working temperature) | 85 [°C] |