Thermal band Sarcon GAR, Suitable for perfect thermal transfer and electrical insulatiion assemblies, Fiberglass reinforced for mechanical stability, on of the best material between thin rubber - perfect thermally, electrically and from mechanical side. Suitable for shapes, pads and cutting profiles
Basic information:
Marking manufacturer | 20GAR-150W |
Type of component: | Thin strips |
Configuration: | Soft surfaces |
Specification: | Hardness max. [IRHD]: 80 |
Construction: | Fiberglass reinforcement |
Mounting | Without glue |
Case [inch] : | I+tape |
Type of material: | Insulating |
Material: Housing | Sarcon GAR |
Color | WH - white |
RoHS | Yes |
REACH | No |
NOVINKA | A |
UL94 | V-0 |
Packaging and weight:
Unit: | m |
Weight: | 20000 [g] |
Type of packaging: | ROLL |
Small package (Number of units): | 50 |
Electro-physical parameters:
Uisol (@25°C/1min/50Hz) | 9000 [V] |
Thermal and mechanical parameters:
Tmin (minimum working temperature) | -40 [°C] |
Tmax (maximum working temperature) | 150 [°C] |
Thermal conductivity | 3 W/m*K |
Rth Thermal Impedance | 0.17 K-in2/W |
W - Width | 150 [mm] |
T - thickness | 0.2 [mm] |